RETRACTOFIT BIO 55

Price: Call for Pricing

RETRACTOFIT BIO

The HAMILTON RETRACTOFIT BIO is an armature designed for applications where sanitary concerns are critical. The armature is steam-sterilizable and autoclavable. The stainless steel DIN 1.44 5 (SS 16) and the FDA-approved EPDM o-rings withstand typical CIP cleaning.

The main advantage of this armature is that the sensor can be withdrawn while the process is running (i.e. for cleaning, calibration or even to replace the electrode), without interrupting the process. The design allows the use of sensors with 10 to 5 mm shaft length and a PG 1 .5 thread, e.g. electrodes such as the HAMILTON POLYCLAVE 225, POLILYTE HTVP 225, EASYFERM PLUS VP 225 and OXYFERM 225.

The armature is very easy to use and maintain. Only one press of the red button is needed to move the electrode into or out of the process. All o-rings are easily replaced without special tools.

An integral safety mechanism prevents the armature from being inserted into the sample without an electrode installed. This prevents the risk of open connection between the inside of the process vessel and the external environment. Two leakage detection openings indicate seal failures during operation.

In the retracted position, the electrode is retained in a chamber where it can be kept moist, cleaned and even calibrated. This can all be done without process interruption or disassembly of the armature. Two tube connectors allow access to the rinsing chamber.

The RETRACTOFIT is designed for applications in the chemical and waste water industry.

ATTENTION:
Check with your dealer for the right
o-ring position or weld-in socket!
(o-ring seals at 55 mm; other distances
on request.).

Advantages:
• Autoclavable
• One-hand operation
• Various leakage indicators
• Longer sensor life due to 5 mm sensor length
• Insertion is only possible with an electrode installed
• No removal of sensor when in measurement position